6000 psi rated.  1/2" npt (f) inlet.  1/4" npt(f) outlet.  Includes metal nozzle.  PARTS MANUAL

Air operated.  Single acting metering valve.  0.2-4.0 cc's per shot.  Up to 60 shots per minute.  Snuffer design.

Designed to dispense small amounts of water thin to paste viscosity materials from 0.005 cc’s to 5 cc’s per shot. Click on picture for more information. Contact us to order. Parts Manual.

Postive displacement metering rod valves and On-Off valves.  Wide variety.

High melt rates for improved capacity, and precision temperature control for better end results. Click on picture for more information. Contact us to order. Parts Manual.

12 ft. heated hose with plug.  5/8" ID.  240V

8 ft heated hose assembly with plug.  120V.

Hot Knife with Tip

Complete line of dispense valves for all applications including robotic. Click on picture for more information. Contact us to order.

50 lb. case of hot melt.  Shipping weight is 57 lb.

FREIGHT CHARGE IS $20.00 PER CASE

Hot melt unit for sealants and adhesives.  Designed to accept up to 8 lb. chunks or bricks.  35 lb pot capactity for slugs, chips, cake or brick form. Great for Butyls and higher viscosity Polyamides.  Perfect for Insulated Glass Applications.  Includes 12 ft. heated hose assembly and light weight insulated handgun.  Equipped with 360 degree swivel attachment. Includes 3 nozzles. Up to 400 degrees F.  Up to 2.5 lbs per minute flow capacity without gunning tip.  208/220/240/60.  Solid state temperature controls accurate to +/- 1 degree f.  Progressive cavity pump for smooth pulse free flow. Tank unit.  Not for use with low viscosity hot melt materials like EVA, Polyester and PSA.  DO NOT use with PUR or any other curable materials.  OPERATIONS MANUAL   PARTS LIST   POT EXPLODED VIEW   GUN and HOSE MANUAL   WIRING DIAGRAM   

50 lb. case of hot melt.  Shipping weight is 57 lb.

FREIGHT CHARGE IS $20.00 PER CASE.

Case of Dessicant.  Shipping weight is 57 lbs.

FREIGHT COST IS $20.00 PER CASE.

Stand for ATX II Hot Melt Unit

#3 - 3/16" Nozzle.  1 included.

#4- 1/4" Nozzle, 1 included.

#5 - 5/16 Nozzle.  1 included

#6 - 3/8" Nozzle.  1 included.

#7 - 7/16" Nozzle.  1 included.

#8 - 1/2" Nozzle.  1 Included.

#9 - 9/16" Nozzle.  1 included.

#10 - 5/8" Nozzle.  1 included.

#11 - 11/16" Nozzle.  1 Included.

#12 - 3/4" Nozzle.  1 included.

#13 - 13/16" Nozzle.  1 included.

#14- 7/8" Nozzle.  1 included.

#15 -15/16" Nozzle.  1 included.

#16 - 1" Nozzle.  1 included.

The 60.60¹ pump is specially designed for pumping viscous materials. SAMES KREMLIN equipment can process a wide range of materials including oils, greases, adhesives and sealants.

This equipment has proven itself to be strong and reliable over the years, and can process products up to 30,000 centipoise depending on specification.

The system pumps directly from the original material container and is used on 5 Gal (20 L) pails.

The modular conce pt allows you to select an extrusion system comprised of an assembled pump, elevator and follower plate. Additional individual components are available including: filter, regulator, hose or gun to complete your system. Optional system accessories are available to suit your application.

*The unit depicted on this page includes the following:
   -60.60 extrusion pump with PTFE/PE seals ( II2G IIB T3) Part #: 151-040-000
   -Single post ram with air control / pail hold down (3000) Part #: 668-080-005
   -Follower Plate - Teflon Coated: Twin O-Ring (EPDM) Seal - 5 Gal /20 L Ø11.25” (285 mm) Part #: 151-102-200
*NOTE: Pump, Ram and Follower plate come assembled.

¹First digit ‘60’ refers to Pump Pressure Ratio (e.g., 60:1)
Second digit '60' refers to Fluid Delivery in cc for one Cycle (or double stroke) of the hydraulic section (e.g., 60 cc).