This hose set includes one 32' Air Hose & one 32' Fluid hose. It will come preassembled & inside a hose sleeve.
This will fit any Sames Kremlin Pump and Xcite Gun Combo that has the Factory Fittings.
$375.00
Prod. ID: 668-780-315
GUN,FPRO S,15-MVB
$375.00
GUN,FPRO S,15-MVB
Perfectly balanced, the FPro S suction paint spray gun provides a superior finish for all levels of painters. SAMES KREMLIN offers the largest range of sprayguns and accessories for all FPro applications in high-end finishing markets.
Conventional Manual Suction Spray Gun SPECS Designation Value Unit: metric (US) Maximum Fluid Outlet 750 (26.3) cc/min (oz/min) Minimum Fluid Outlet 200 (7) 6 (87) cc/min (oz/min) Maximum Air Pressure bar (psi) Recommended Air Pressure (min) 2.5 (36) - 3.5 (51) bar (psi) Air Consumption 23 (13.5) - 29.7(17.5) m3/h (cfm) Maximum Fluid Temperature 50 (122) °C (°F) Air Inlet M 1/4" NPS Fluid Inlet M 3/8" NPS Weight 480 (16.9) g (oz) PH 5-8 Transfer Efficiency CONV 66 %
$146.41
Prod. ID: GA10126
25' AA Hose Set for Graco
$146.41
25' AA Hose Set for Graco
This hose set includes one 25' Air Hose & one 25' Fluid hose. It will come preassembled & inside a hose sleeve.
$254.91
Prod. ID: GA10125
50' Airmix Hose Set for Sames Kremlin
$254.91
50' Airmix Hose Set for Sames Kremlin
This hose set includes one 50' Air Hose & one 50' Fluid hose. It will come preassembled & inside a hose sleeve.
This will fit any Sames Kremlin Pump and Xcite Gun Combo that has the Factory Fittings.
HVLP- Air pressure is less than 10 PSI at the air cap meeting all USA standards and regulatory requirements.
LVMP- Provides equal to or greater transfer efficiency at higher pressures than HVLP
CONVENTIONAL- For spray applications requiring higher air pressure. Also suitable for viscous material set-ups.
AIRLESS- Uses high fluid pressure to atomize. Fluid is forced through an elliptical shaped orifice.
AIR ASSSIST AIRLESS or AIRMIX- Uses high fluid pressure to atomize. Fluid is forced through an elliptical shaped orifice. Additional air is injected before the locus of atomization, resulting in a very stable fan and film build.
SAMES KREMLIN's FStart S spray guns make it easy and cost-effective to apply water-based or solvent-based coatings. Conventional sprayers are available to meet the needs of small to large finishing shops. The FStart S spray guns can be used by both beginners and experienced professionals giving a desired high quality finish.
$29.64
Prod. ID: 1011-00185
1004AV HOSE, 6FT, 1/4FNPSM, PLTD
$29.64
1004AV HOSE, 6FT, 1/4FNPSM, PLTD
$375.00
Prod. ID: 668-780-318
GUN,FPRO S,18-MVB
$375.00
GUN,FPRO S,18-MVB
Perfectly balanced, the FPro S suction paint spray gun provides a superior finish for all levels of painters. SAMES KREMLIN offers the largest range of sprayguns and accessories for all FPro applications in high-end finishing markets.
Conventional Manual Suction Spray Gun SPECS Designation Value Unit: metric (US) Maximum Fluid Outlet 750 (26.3) cc/min (oz/min) Minimum Fluid Outlet 200 (7) 6 (87) cc/min (oz/min) Maximum Air Pressure bar (psi) Recommended Air Pressure (min) 2.5 (36) - 3.5 (51) bar (psi) Air Consumption 23 (13.5) - 29.7(17.5) m3/h (cfm) Maximum Fluid Temperature 50 (122) °C (°F) Air Inlet M 1/4" NPS Fluid Inlet M 3/8" NPS Weight 480 (16.9) g (oz) PH 5-8 Transfer Efficiency CONV 66 %
$125.32
Prod. ID: GA10121
20' Airmix Hose Set for Sames Kremlin
$125.32
20' Airmix Hose Set for Sames Kremlin
This hose set includes one 20' Air Hose & one 20' Fluid hose. It will come preassembled & inside a hose sleeve.
This will fit any Sames Kremlin Pump and Xcite Gun Combo that has the Factory Fittings.
$74.77
Prod. ID: Fluid316x25NN
1004AV HOSE, 25FT, 1/4 FNPSM, PLTD, W/GUARDS
$74.77
1004AV HOSE, 25FT, 1/4 FNPSM, PLTD, W/GUARDS
$445.00
Prod. ID: 135-780-315
GUN,FPRO S,15-MVB,C/W CUP
$445.00
GUN,FPRO S,15-MVB,C/W CUP
Perfectly balanced, the FPro S suction paint spray gun provides a superior finish for all levels of painters. SAMES KREMLIN offers the largest range of sprayguns and accessories for all FPro applications in high-end finishing markets.
$445.00
Prod. ID: 135-780-318
GUN,FPRO S,18-MVB,C/W CUP
$445.00
GUN,FPRO S,18-MVB,C/W CUP
Perfectly balanced, the FPro S suction paint spray gun provides a superior finish for all levels of painters. SAMES KREMLIN offers the largest range of sprayguns and accessories for all FPro applications in high-end finishing markets.
$445.00
Prod. ID: 135-780-423
GUN,FPRO S,23-LVB,C/W CUP
$445.00
GUN,FPRO S,23-LVB,C/W CUP
Perfectly balanced, the FPro S suction paint spray gun provides a superior finish for all levels of painters. SAMES KREMLIN offers the largest range of sprayguns and accessories for all FPro applications in high-end finishing markets.
$445.00
Prod. ID: 135-780-427
GUN,FPRO S,27-LVB,C/W CUP
$445.00
GUN,FPRO S,27-LVB,C/W CUP
Perfectly balanced, the FPro S suction paint spray gun provides a superior finish for all levels of painters. SAMES KREMLIN offers the largest range of sprayguns and accessories for all FPro applications in high-end finishing markets.
$375.00
Prod. ID: 668-780-423
GUN,FPRO S,23-LVB
$375.00
GUN,FPRO S,23-LVB
Perfectly balanced, the FPro S suction paint spray gun provides a superior finish for all levels of painters. SAMES KREMLIN offers the largest range of sprayguns and accessories for all FPro applications in high-end finishing markets.
Conventional Manual Suction Spray Gun SPECS Designation Value Unit: metric (US) Maximum Fluid Outlet 750 (26.3) cc/min (oz/min) Minimum Fluid Outlet 200 (7) 6 (87) cc/min (oz/min) Maximum Air Pressure bar (psi) Recommended Air Pressure (min) 2.5 (36) - 3.5 (51) bar (psi) Air Consumption 23 (13.5) - 29.7(17.5) m3/h (cfm) Maximum Fluid Temperature 50 (122) °C (°F) Air Inlet M 1/4" NPS Fluid Inlet M 3/8" NPS Weight 480 (16.9) g (oz) PH 5-8 Transfer Efficiency CONV 66 %
$44.64
Prod. ID: 71-280-7
7FT LP Fluid Hose Assy
$44.64
7FT LP Fluid Hose Assy
$29.64
Prod. ID: 1011-00185
1004AV HOSE, 6FT, 1/4FNPSM, PLTD
$29.64
1004AV HOSE, 6FT, 1/4FNPSM, PLTD
$75.32
Prod. ID: 1011-00186
1004AV HOSE, 25FT, 1/4FNPSM, W/GUARDS
$75.32
1004AV HOSE, 25FT, 1/4FNPSM, W/GUARDS
$75.32
Prod. ID: 1011-00186
1004AV HOSE, 25FT, 1/4FNPSM, W/GUARDS
$75.32
1004AV HOSE, 25FT, 1/4FNPSM, W/GUARDS
$229.00
Prod. ID: 135-756-315
GUN,F-START P,HVLP-15-XLVA
$229.00
GUN,F-START P,HVLP-15-XLVA
SAMES KREMLIN’s FStart P spray guns make it easy and cost-effective to apply water-based or solvent-based coatings. HVLP & Conventional sprayers are available to meet the needs of small to large finishing shops. The FStart P spray guns can be used by both beginners and experienced professionals giving a desired high-quality finish.
$229.00
Prod. ID: 135-756-315
GUN,F-START P,HVLP-15-XLVA
$229.00
GUN,F-START P,HVLP-15-XLVA
SAMES KREMLIN’s FStart P spray guns make it easy and cost-effective to apply water-based or solvent-based coatings. HVLP & Conventional sprayers are available to meet the needs of small to large finishing shops. The FStart P spray guns can be used by both beginners and experienced professionals giving a desired high-quality finish.
$169.00
Prod. ID: 135-756-415
GUN,F-START P,CONV-15-XLVA
$169.00
GUN,F-START P,CONV-15-XLVA
SAMES KREMLIN’s FStart P spray guns make it easy and cost-effective to apply water-based or solvent-based coatings. HVLP & Conventional sprayers are available to meet the needs of small to large finishing shops. The FStart P spray guns can be used by both beginners and experienced professionals giving a desired high-quality finish.
$169.00
Prod. ID: 135-756-415
GUN,F-START P,CONV-15-XLVA
$169.00
GUN,F-START P,CONV-15-XLVA
SAMES KREMLIN’s FStart P spray guns make it easy and cost-effective to apply water-based or solvent-based coatings. HVLP & Conventional sprayers are available to meet the needs of small to large finishing shops. The FStart P spray guns can be used by both beginners and experienced professionals giving a desired high-quality finish.
$169.00
Prod. ID: 135-756-415
GUN,F-START P,CONV-15-XLVA
$169.00
GUN,F-START P,CONV-15-XLVA
SAMES KREMLIN’s FStart P spray guns make it easy and cost-effective to apply water-based or solvent-based coatings. HVLP & Conventional sprayers are available to meet the needs of small to large finishing shops. The FStart P spray guns can be used by both beginners and experienced professionals giving a desired high-quality finish.
$145.00
Prod. ID: 135-756-218
GUN,F-START G,CONV-18-LVA,
$145.00
GUN,F-START G,CONV-18-LVA,
SAMES KREMLIN's FStart G spray guns make it easy and cost-effective to apply water-based or solvent-based coatings. HVLP and Conventional sprayers are available to meet the needs of small to large finishing shops. The FStart G spray guns can be used by both beginners and experienced professionals giving a desired high-quality finish.
$145.00
Prod. ID: 135-756-218
GUN,F-START G,CONV-18-LVA,
$145.00
GUN,F-START G,CONV-18-LVA,
SAMES KREMLIN's FStart G spray guns make it easy and cost-effective to apply water-based or solvent-based coatings. HVLP and Conventional sprayers are available to meet the needs of small to large finishing shops. The FStart G spray guns can be used by both beginners and experienced professionals giving a desired high-quality finish.